用c语言编写动态烟花 用c语言编写爱心的代码

#include <stdio.h>#include <string.h>#include <stdlib.h>#include <conio.h>#define STARNUM 2#define STARCHAR '*'void main() { int starx[STARNUM], stary[STARNUM]; .

P1口接8个发光二极管共阳,烧入下面程序 #include <AT89X51.H> unsigned char i; unsigned char temp; unsigned char a,b; void delay(void) { unsigned char m,n,s; for(m=20.

opengl 建议用MFC来做 挺容易实现的

#include<reg51.h> //51系列单片机定义文件 #define uchar unsigned char //定义无符. { register uint bt; for(;t;t--) for(bt=0;bt<255;bt++); } 跑马灯程序最基本的,c语言还未入.

unsigned char lights = 0; //lights到各位分别表示P1.0~P1.7 int i=0; while (1) { //①L1、L2、…L8依次点亮 lights = 0x01; for (i=0; i { delay(500); lights = lights } delay(500); //②L.

#include #include int main() { int m = 120; system(＂cls＂); while (m >= 0) { printf(＂\r%d:%.2d＂, m/60, m%60); m = m - 1; Sleep(1000); } system(＂pause＂); return 0; }原错误:if (a=0) 应为 if (a==0)

#include #define uchar unsigned char uchar num_code[]={0,1,2,3,4,5,6,7,8,9,1,3,5,7,9,0,2,4,6,8,0,1,2,3,4,5,6,7,0,1}; sbit add_1ms=P1^0; void delay_nms(unsigned int n)//延迟n毫秒 { uchar i; while(n!=0) { for(i=250;i>0;i--); n--; } } main() { uchar k; unsigned int m=500; //一开始0.5s while(1) for(k=0;k

#include<stdio.h>#include<windows.h> int main() { for(int i=0;i<100;i++) //不停地闪烁100次 { printf(＂灯亮＂); //亮灯,输出一个灯的符号 Sleep(500); //延时500毫秒 system(＂cls＂); //系统命令,清屏 printf(＂灯灭＂); Sleep(800); //延时800毫秒 } return 0; }

c语言流水灯程序是学习的基础,一定要搞懂!给你发两个! (一) #include //51系列单片机定义文件 #define uchar unsigned char //定义无符号字符 #define uint unsigned .

最好是使用更高级的语言而不是C语言来实现这个问题 再看看别人怎么说的.